• Nipple designed for feeding between breast and bottle.
• SmartClose™ locks out leaks
• EasyMix™ is designed to help reduce bubbles and clumps.

Not Applicable 

• Similac Simply Smart Bottle 4-oz Bottle single / 4 x 3 ct
• Similac Simply Smart 4-oz Bottle 2 count / 6 x 2 ct
• Similac Simply Smart Starter Set / 2 ct
• Similac Simply Smart 8-oz Bottle single / 4 x 3 ct
• Similac Simply Smart 8-oz Bottle 2 count / 6 x 2 ct
• Similac Simply Smart Level 1 Nipple (Slow Flow) 2 count / 6 x 2 ct
• Similac Simply Smart Level 2 Nipple (Medium Flow) 2 count / 6 x 2 ct
• Similac Simply Smart Level 3 Nipple (Fast Flow) 2 count / 6 x 2 ct
• Similac Simply Smart Level Y Nipple (for Thicker Formula) 2 count / 6 x 2 ct
• Similac On-the-go Powder Cap single / 6 x 2 ct

• Instructions for Use: Bottle & Nipples
  
  Before first use
  • Wash all bottle components in hot, soapy water before initial use. Ask your baby's doctor if you need to boil or sterlize bottles, nipples and rings.
  Cleaning
  • Wash bottle and all components before every use.
  • Wash your hands, surfaces and utensils.
  • Dishwasher safe; use top rack only and wash on a normal cycle.
  Bottle assembly and feeding instructions
  1. Insert EasyMix™ into the top of the bottle for a secure fit. Note: The bottle will function with or without the EasyMix™.
  2. Put desired amount of breast milk or formula into the bottle. When using formula, mix according to the formula manufacturer's instructions.
  3. Insert the nipple by pulling the top of the nipple through the SmartClose™ ring until it fits securely.
  4. Tighten the ring on the bottle. When it is securely locked you will see blue in the indicator window.
  5. Shake or swirl the bottle. The EasyMix™ has been designed to help reduce the amount of bubbles or formula clumps.
  6. To test the temperature of the breast milk or formula, we recommend that you always sprinkle a few drops on the inside of your wrist to make sure it is not too hot.
  
  
• Instructions for Use: On-the-go Powder Cap (sold separately)
  
  1. Wash and dry the powder cap before every use.
  2. Screw both parts of the cap together.
  3. Open the lid and fill with enough powder formula to make 1 bottle. Refer to the formula manufacturer's instructions for the appropriate amount of formula for your baby.
  4. Close the lid and attach this cap to bottle. Formula should not be stored in the cap for longer than 5 days.
  5. Add water to bottle as directed by formula manufacturer.
  6. Just prior to feeding, pour powder formula into bottle.
  7. After use, unscrew cap into two parts and clean with hot, soapy water. Allow the cap to thoroughly dry before using again by storing it in a cool, dry place.